Why Your Rolls Royce Remote Key Isn't Working
If you're Rolls Royce Phantom remote key isn't working, it may be due to one of the following issues. It could have a dead battery in the coin or water damage, or even a faulty chip that needs to be reprogrammed.
The keys should be stored in a dry area away from electrical or wet areas. If you've done this, but it doesn't work, you can try the following steps:
Troubleshooting
Rolls Royce is a sophisticated, cultivated automotive brand with a mind for excellence. Regular maintenance is essential to avoid costly and time-consuming problems in the future. The most crucial maintenance task is to identify and clear fault codes. Fault codes are like tiny SOS signals sent from your vehicle's intricate electronic system. Not noticing them is like the ignoring of a cough that is persistent - it could be an indication of a larger issue.
There are many reasons your key fob might not function properly. It could be due to a dead coin battery, water damage or signal interference, module issues or a damaged electronic chip. If you've tried everything, from replacing the battery to reprogramming, and the problem persists, it's a good idea to bring your Rolls Royce in to a professional to further troubleshoot.
The battery is the first thing you should examine when a key fob ceases to function. A drained coin battery is the most frequent reason for the key fob to cease functioning. It is crucial to replace the battery with a button battery of the same voltage, size and specifications as the original. It is recommended that the key fob be stored in a safe place and away from objects such as coins or keys that could cause mechanical damage.
After replacing the battery, ensure that all metal retaining clip remain in place and do not cause any contact issues. Make sure the battery is free of corrosion-causing substances. If the battery isn't authentic Rolls-Royce replacement, it could be damaged by parts that aren't suitable and cause the door or receiver module to close.
Faulty Receiver Module
If the key fob stops working one day and you've tried everything (replaced coin battery, reprogrammed key or even an extra) it could indicate a problem with the receiver module which is responsible for detecting and decoding the remote control signals. This is particularly relevant if you are capable of using the key fob in another vehicle and it functions.
The receiver modules of key fobs are equipped with metal clips that hold the battery and complete the circuit on the button's activation. They can become damaged or bent, preventing the key fob from receiving the correct signal to unlock or lock the car. rolls royce dawn key TheKeyLab may also stop working due to the chip being damaged.
Faulty Key Fob
If your device stops working, it could be due to a number of factors. The most common issue is usually a dead battery for the coin-cell. It can be replaced easily within a matter of minutes. Water damage, receiver module problems or signal interference can also cause the key fob to cease working. You can check these problems by disassembling your key fob, and then applying electronic cleaner or isopropyl ethanol to the chip.
Another reason could be worn buttons. The buttons made of rubber on car key fob remotes can become loose over time or wear out. This causes the pressure being lost between the button and the designated pressure point, which causes it to not function properly. This is a simple fix for the majority of key fobs that can be done at home by disassembling the key, removing the buttons and cleaning them. Then, simply soldering them back in place can to restore functionality.
Other causes for a faulty key fob include dead 12 volt battery keys that are not paired and require reprogramming, or a damaged electronic chip. A defective electronic chip will hinder the key fob's ability to send an email to the vehicle's receiving module. The key fob is able to start the engine of your Rolls Royce when it receives an indication from the chip.
Sometimes, thieves with a technological advantage are able to hack a key with a push-button. These thieves can use artificial intelligence to pick up the unique signal generated by the fob that is on the key and even unlock or activate your car's ignition system. Luckily, this type of hacking is becoming increasingly rare because security measures have significantly improved in recent years.
You can always call the locksmith service if you've lost the remote key for your Rolls Royce. They will make duplicates. A professional locksmith is familiar with every car model, including those with complicated central lock systems. This means they can make a copy of your key fob without damaging the original. They also offer a cheaper alternative to buying a replacement from the dealer. Autolocks LTD is a well-known locksmith service in the South East of England, can provide an excellent service for all types of Rolls Royce models.